Electric vehicle charger repair

A Study on the 500W Class Converter for Power Supply of Ultrasonic Anti-Fouling System for Small Ships Based on Independent Power 독립전원 기반 소형 선박의 초음파 방오 시스템 전원 공급용 500W급 컨버터에 관한 연구

The Transactions of the Korean Institute of Electrical Engineers KIEE Vol. 72, No. 10, p.1173-1179 ISSN (print) :1975-8359 ISSN (online) :2287-4364 Received :15 June 2023Revised :14 September 2023Accepted :22 September 2023 DOI :http://doi.org/10.5370/KIEE.2023.72.10.1173

 A Study on the 500W Class Converter for Power Supply of Ultrasonic Anti-Fouling System for Small Ships Based on Independent Power 독립전원 기반 소형 선박의 초음파 방오 시스템 전원 공급용 500W급 컨버터에 관한 연구 김동욱 (Dong-Wook Kim) 1iD 김배성 (Bae-Sung Kim) 1iD 신덕식 (Duck‑Shick Shin) †iD

 Abstract 

An ultrasonic anti-fouling system that works to remove bio-fouling, which is organic substances attached to structures under the water surface of a ship, while the ship is anchored is proposed. In order to review the configuration and applicability of the proposed system, it is designed by analyzing the operation patterns of coastal small ships and simulating power consumption according to the operation patterns. In this paper, a 500W class converter is proposed among the proposed system. To achieve high performance, a continuous conduction mode that can reduce the size of a circuit and improve efficiency of the system is applied, a two-phase interleaved boost converter applied to schottky diode and N-MOSFET power switch which are capable of high-speed switching is designed. In addition, P&O method that is easy to implement and has a simple structure among MPPT control algorithms is applied to track the optimal operating point in the non-liner characteristics of independent power module. To verify the usefulness of the proposed system, a 500W class power converter is designed. Through simulations and experiments, the performance of the MPPT algorithm according to the solar radiation condition of the independent power module and the two-phase interleaving algorithm are verified. In particular, the MPPT efficiency of over 99.6% is confirmed even under environmental conditions where the amount of solar radiation rapidly changed from 100% to 75% and the power conversion efficiency at 500W output is confirmed to be 96.26%, confirming the usefulness of the proposed circuit.

VIEW FULL TEXT:http://journal.auric.kr/AURIC_OPEN_temp/RDOC/kiee01/kieet_202310_006.pdf

A Study on the Improvement of Stability Through Improved PLL Control Techniques Based on PFC and LLC Topology With Integrated Transformer 통합 변압기를 적용한 PFC, LLC 토폴로지 기반 개선된 PLL 제어기법을 통한 안정성 향상에 관한 연구 Yong-Jin Shin Woo-Cheol Lee

 

A Study on the Improvement of Stability Through Improved PLL Control Techniques Based on PFC and LLC Topology With Integrated Transformer 

통합 변압기를 적용한 PFC, LLC 토폴로지 기반 개선된 PLL 제어기법을 통한 안정성 향상에 관한 연구 Yong-Jin Shin Woo-Cheol Lee 

 Abstract 

This paper presents an enhanced Phase-Locked Loop (PLL) method using the Goertzel algorithm to improve the performance of Power Factor Correction (PFC) and LLC resonant converters. By eliminating the current sensor at the DC-link capacitor and allowing the LLC converter to operate within the PFC converter's frequency range, the new method ensures efficient Zero Current Switching (ZCS). Experimental and simulation results demonstrate that our approach significantly improves the power factor compared to conventional methods. This solution simplifies the circuit design, reduces overall costs, and increases system reliability.

VIEW FULL TEXT:

http://journal.auric.kr/AURIC_OPEN_temp/RDOC/kiee01/kieet_202407_014.pdf

Signals and Circuits – Baskakov-

 

About the book 

The present book is a course on signals and circuits as it is taught in the USSR. This subject figures prominently among the fundamental disciplines essential to the expertise of communication engineers. Keeping pace with overall progress in science and technology and reflecting the current trends in component design and theory, this course combines and sets forth in a systematic way the most important principles in the field of communications. In his work on the text, the author has been guided by the idea that material should be specifically tailored to the teaching practice at college. This approach has governed the selection of material and the degree of detail in its presentation: its pages contain what, as the author believes, the student can fully assimilate during the time allotted. Specific circuit types, their study and comparative analysis-all this belongs to the specialized subjects in communication engineering. This text includes a wide variety of material and a wealth of concepts and techniques which will come the student’s way for the first time. Ample space is devoted to mathematical tools of study. To link theory closer to practice, the chapters contain a great number of examples and problems giving the student deeper insight into the techniques of engineering analysis. The book was translated from Russian by V. Kuznetsov was published in 1986 by Mir Publishers

SOURCE :https://mirtitles.org/2022/02/12/signals-and-circuits-baskakov/

BOOK IN WEB:https://archive.org/details/baskakov-signals-and-circuits-mir-publishers

ALTERNATIVO ENLACE:https://www.mediafire.com/file/d3k72hu437dqoma/Baskakov+-+Signals+and+Circuits.pdf/file

反激MOS管上的波形分析，反激工作原理-Waveform analysis on flyback MOSFET, flyback working principle.

Of the many converter topologies around today, the flyback topology is one of the most frequently used. Although simple, this converter design offers great advantages for certain applications. New, more complex topologies have surfaced in recent years, but flyback converters remain a popular design choice.

Operating Modes

 Like other converters a yback converter has two operating modes; continuous conduction mode (CCM) and discontinuous conduction mode (DCM). The two operation modes have dierent transfer equations and dierent current and voltage wave forms. Therefore, from a design point of view it is important to analyse the current and voltage that the electric components in the converter experience. Particularly the current owing through the circuit, voltage across the switch and the diode [2]. The magnetizing inductance and the load current determines the operation mode of the converter. During the analysis of the dierent conduction modes of the converter, the following assumptions will be made [5].  The converter is operating in steady state  The converter is ideal, that is the input power is equal to the output power  Leakage inductance, stray capacitors and stray resistances are neglected.