terça-feira, 27 de abril de 2010
segunda-feira, 26 de abril de 2010
Philippe ROUX
Ce site s'adresse à l’étudiant en Electronique Analogique.
Il est issu d’un cours donné, jusqu'en 2004, en première année, à l’Institut Universitaire de Technologie de Bordeaux, Département de Génie Electrique
Il est issu d’un cours donné, jusqu'en 2004, en première année, à l’Institut Universitaire de Technologie de Bordeaux, Département de Génie Electrique
Laboratory of Electrical Engineering and Power Electronics
A strategic regroupment
The L2EP was born thanks to the will of 4
establishments working in partnership : The
University of Science and Technology of
Lille, Arts et Métiers ParisTech, l''Ecole
Centrale de Lille, Hautes Etudes
d''Ingénieur. The idea was to bring
together, in the same laboratory, all the
activities of research in electronic
engineering.The L2EP was established in
Lille and has an international influence. The
L2EP is a major actor in its areas of research
ELECTRIC ENERGY SYSTEM EDUCATION AND RESEARCH-UNIVERSITY OF MINNESOTA
ELECTRIC ENERGY SYSTEM EDUCATION AND RESEARCH
Internet-based Monthly Seminars
The live and past seminar videos are provided and archived by UNITE. For proper, uninterrupted viewing, please review UNITE's Streaming Video
The live and past seminar videos are provided and archived by UNITE. For proper, uninterrupted viewing, please review UNITE's Streaming Video
sábado, 24 de abril de 2010
The Analysis of Mixed Series and Parallel Snubbers to reduce Conducted EMI Emission on a Switching Converter
The Analysis of Mixed Series and Parallel Snubbers to reduce Conducted EMI Emission on a Switching Converter
C. U-Yaisom*, V.Tarateeraseth**, W. Khan-ngern***, S. Nitta**** *Faculty of Engineering Eastern Asia University Patumtanee, 12110, Thailand E-mail:yaisom@hotmail.com **Faculty of Engineering, Srinakharinwirot University, Ongkharak, Thailand E-mail: vuttipon@swu.ac.th ***Faculty of Engineering and Research Center for Communication and Information Technology King Mongkut Institute of Technology Ladkrabang, Bangkok, 10520, Thailand E-mail: kkveerac@kmitl.ac.th ****Graduate School, Production System Engineering Salesian Polytechnic, 2-35-11 Igusa Suginami, Tokyo, 167-0021, Japan E-mail: nitta@cc.tuat.ac.jp
The Comparison of Conducted Electromagnetic Interference Effect on High Frequency Transformer Winding Techniques
The Comparison of Conducted Electromagnetic Interference Effect on High Frequency Transformer Winding Techniques Tanathep Maneenopphon1, Vuttipon Tarateeraseth2, Werachet Khan-ngern1
Tanathep Maneenopphon1, Vuttipon Tarateeraseth2, Werachet Khan-ngern1 1Faculty of Engineering and EMC Laboratory, Research Center for Communications and Information Technology (ReCCIT) King Mongkut’s Institute of Technology Ladkrabang (KMITL), Bangkok, 10520, Thailand 2Faculty of Engineering, Srinakharinwirot University, Ongkharak, Thailand Phone/Fax: +662 737-3000 Ext. 3322, E-mail: tmn_ta@hotmail.com, vuttipon@swu.ac.th, kkveerac@kmitl.ac.th
REGULATION OF OUTPUT VOLTAGE IN BOOST POWER FACTOR CORRECTION CONVERTER WITH ELECTRO MAGNETIC
REGULATION OF OUTPUT VOLTAGE IN BOOST POWER FACTOR
CORRECTION CONVERTER WITH ELECTRO MAGNETIC
INTERFERENCE FILTER
P. RAM MOHAN
Assistant Professor, G. Pulla Reddy Engg. College, Kurnool, Andhra Pradesh, India
rammohan_cdp@yahoo.co.in
M. VIJAYA KUMAR
Professor, JNTU College of Engineering, Anantapur, Andhra Pradesh, India
O.V. RAGHAVA REDDY
Scientist, ISRO Satellite Center, Bangalore, Karnataka, India
quinta-feira, 22 de abril de 2010
Evaluation of Efficiency of Active Clamp Dual Flyback Inverter for Photovoltaic Systems using Simulation Method
Evaluation of Efficiency of Active Clamp Dual Flyback Inverter for Photovoltaic Systems using Simulation Method
R. Šul, B. Dobrucký
University of Zilina, Univerzitna 1, 010 21 Zilina, Slovak Republic, e-mails: sul@fel.uniza.sk, dobrucky@fel.uniza.sk
P. Čerňan
Clayton Power R&D, s.r.o, Legionarska 7158/5, SK911 01 Trencin, Slovak Republic, e-mail: pc@claytonpower.com
Introduction
Dual flyback inverter (DFBI) is one of the preferred topologies for isolated low cost low power photovoltaic (PV) applications. It converts PV cells DC voltage to output AC voltage using single power stage. It is important to understand loss distribution of DFBI be able to reach efficiency limits of this topology. This paper evaluates the efficiency of DFBI based on computer simulation results worked-out by Simetrix circuit simulator.
Performance Investigation of Dynamic Characteristics of Power Semiconductor Diodes
Performance Investigation of Dynamic Characteristics of Power Semiconductor Diodes
P. Špánik, R. Šul, M. Frívaldský, P. Drgoňa, J. Kandráč
University of Zilina, Univerzitna 1, 010 26, Zilina, Slovakia,
e-mail: sul@fel.uniza.sk, frivaldsky@fel.uniza.sk, spanik@fel.uniza.sk, drgona@fel.uniza.sk
ELECTRONICS AND ELECTRICAL ENGINEERING
ISSN 1392 – 1215 2010. No. 3(99)
ELEKTRONIKA IR ELEKTROTECHNIKA
quarta-feira, 21 de abril de 2010
LOSSES PREDICTION IN SILICON STEEL SHEETS FOR MAGNETIC INDUCTION
LOSSES PREDICTION IN SILICON STEEL SHEETS FOR MAGNETIC
INDUCTION WAVEFORMS WITHOUT LOCAL MINIMA
J. P. F. Lima, A. J. Batista, P. C. M. Machado, E. G. Marra
Escola de Engenharia Elétrica e de Computação, Universidade Federal de Goiás
Praça Universitária s/n, Setor Universitário, 74605-220, Goiânia – GO, Brasil
INDUCTION WAVEFORMS WITHOUT LOCAL MINIMA
J. P. F. Lima, A. J. Batista, P. C. M. Machado, E. G. Marra
Escola de Engenharia Elétrica e de Computação, Universidade Federal de Goiás
Praça Universitária s/n, Setor Universitário, 74605-220, Goiânia – GO, Brasil
terça-feira, 20 de abril de 2010
The Current Transformer Parameters Investigation and Simulations
The Current Transformer Parameters Investigation and Simulations
P. Rafajdus, P. Braciník, V. Hrabovcová
Department of Power Electrical Systems, Faculty of Electrical Engineering, University of Žilina,
Univerzitná 1, 010 21 Žilina, Slovak Republic, e-mail: pavol.rafajdus@kves.utc.sk
domingo, 18 de abril de 2010
Power Loss Calculation of High Frequency Transformers
Power Loss Calculation of High Frequency Transformers
Geun-Soo Choi*, Shin-Yong Yoon*, Soo-Hyun Baek** and Kim Yong**
Journal of Electrical Engineering & Technology, Vol. 1, No. 3, pp. 338~342, 2006
Abstract – This paper analyzed the power loss of transformers considering the magnetic component.
For this, each winding strategy and the effect of air gap between the ferrite core have been an
important variable for optimal parameter calculation. Inductors are very well known design rules to
devise, but the performance of the flyback converter as a function of transformer winding strategy has
not been fully developed. The transformer analysis tool used was PExpert. The influence of the
insulator thickness, effect of the air gap, how the window height and variation of the capacitive value
effects the coil and insulator materials are some of parameters that have been analyzed in this work.
The parameter analysis is calculated to a high frequency of 48[kHz]. Therefore, the final goal of this
paper was to calculate and adjust the parameters according to the method of winding array and air gap
minimizing the power loss
sábado, 17 de abril de 2010
THE DEVELOPMENT OF ELECTRIC BALLAST FOR AND INSTANT START/RESTART OF METALHALIDE LAMP
THE DEVELOPMENT OF ELECTRIC BALLAST FOAR AND INSTANT START/RESTART OF METALHALIDE LAMP.
READ FULL PAPER: http://www.4shared.com/document/8OOSFl42/METALHALIDE.html
Analysis of Discharge Lamp Driving Characteristics using PSpice
Analysis of Discharge Lamp Driving
Characteristics using PSpice
Jeong-Ho Cho
Department of Electrical Engineering,
Graduate School of Industry,
Pusan National UniversityAbstract
A new PSpice dynamic fluorescent lamp model has been developed which describes the
non-linear resistance of fluorescent lamps operating at high-frequency.
The model is based on exponential approximation that represents the equivalent resistance
variation as function of power, constructed, by experimental results for several power levels.
Simulation and experimental results are presented to verify the feasibility of the model and,
moreover, and electronic ballast example using the proposed model is presented to further
demonstrate its applications
BALASTRO ELECTRONICO PARA UNA LAMPARA FLUORESCENTE 40WATTS
BALASTRO ELECTRONICO PARA UNA LAMPARA FLUORESCENTE 40WATTS UTILIZANDO INVERSOR PUSH PULL.
TESIS PARA OBTENER EL TITULO DE INGENIERO ELECTRONICO
AUTOR: CARLOS GARCIA ULLOA
UNIVERSIDAD TECNOLOGICA DE LA MIXTECA - OAXACA-2006
SI DESEAS LEER LA TESIS COMPLETA TIENES QUE ACCESAR :http://www.4shared.com/document/7tiVYT8y/9957.html
TESIS PARA OBTENER EL TITULO DE INGENIERO ELECTRONICO
AUTOR: CARLOS GARCIA ULLOA
UNIVERSIDAD TECNOLOGICA DE LA MIXTECA - OAXACA-2006
SI DESEAS LEER LA TESIS COMPLETA TIENES QUE ACCESAR :http://www.4shared.com/document/7tiVYT8y/9957.html
sexta-feira, 16 de abril de 2010
Assinar:
Postagens (Atom)