No Blog Eletrônica de Potência você encontrará informações sobre teses,artigos,seminarios,congressos,tecnologias,cursos,sobre eletrônica potência. “TEMOS O DESTINO QUE MERECEMOS. O NOSSO DESTINO ESTA DE ACORDO COM OS NOSSOS MERITOS” ALBERT EINSTEIN. Imagination is more important than knowledge, for knowledge is limited while imagination embraces the entire world. EL FUTURO SE CONSTRUYE HOY,EL SUCESSO NO ES FRUTO DE LA CASUALIDAD,SE HUMILDE ,APRENDE SIEMPRE CADA DIA.
AUTOR DO BLOG ENG.ARMANDO CAVERO MIRANDA SÃO PAULO BRASIL
"OBRIGADO DEUS PELA VIDA,PELA MINHA FAMILIA,PELO TRABALHO,PELO PÃO DE CADA DIA,PROTEGENOS DO MAL"
domingo, 22 de janeiro de 2017
A study on Development of an algorithm for reducing neutral current in three-phase four-wire PWM rectifier of UPS Kim,Seung Ho (SupervisorSong,JoongHo) Dept.of Electrical Engineering Graduate School of Industry and Engineering Seoul National University of Science and Technology-SOUTH KOREA
ABSTRACT
Recently, the power quality sensitive loads such as computer and communications are so increased that the power supply with good power quality has come to the fore.However,it is possible that the public grid is interrupted by unexpected fault.Therefore,the UPS(uninterruptible power supply)has be come an alternative solution to solve this problem.Generally, the UPS consist of a rectifier,a battery,and a PWM inverter and recently they use IGBT PWM rectifier to reduce input THDi and improve the input power factor.
In this configurations the three-phase four-wire inputUPS is widely used to eliminate the transformers in the UPS system.The aims of control algorithm for the IGBT PWM rectifierin three-phase four-wire UPS is a unity power factor.The SVM(space vector modulation)is one of the most popular and preferable PWM scheme because it reduces the commutation losses and harmonics in the output voltage,and has higher modulation index than SPWM(sinusoidal PWM)but they need a 3D SVM to control three-phase four-wire PWM rectifier and have some difficulties like as selection of inductance of input inductor and controls the neutral current.
To improve this problem the another control algorithm which controls each phase individually has been suggested but this control algorithm use analog based control is sensitive and unstable.So another new algorithm which is added d-q control to control algorithm which controls each phase individually is suggested and it can control stably and can reduce neutral current too.This can be seen by computer simulation and experimental result.
sexta-feira, 20 de janeiro de 2017
ADVANCED INVERTER CONTROL FOR UNINTERRUPTIBLE POWER SUPPLIES AND GRID-CONNECTED RENEWABLE ENERGY APPLICATIONS By Shuai Jiang Michigan State University - Electrical Engineering – Doctor of Philosophy
ABSTRACT
ADVANCED INVERTER CONTROL FOR UNINTERRUPTIBLE POWER SUPPLIES AND GRID-CONNECTED RENEWABLE ENERGY APPLICATIONS
By Shuai Jiang
A DISSERTATION Submitted to Michigan State University in partial fulfillment of the requirements for the degree of Electrical Engineering – Doctor of Philosophy
The advancement of digital signal processors (DSPs) and programmable logic devices in modern power electronics systems offer great control flexibility and capability, providing attractive features particularly for applications in which complex control tasks are involved. This dissertation investigates some DSP based advanced control algorithms for pulse-width modulation (PWM) inverter applications, in particular, voltage regulated inverters connected with AC loads and current regulated inverters connected with utility grids. Uninterruptible power supply (UPS) is a typical example of voltage regulated inverter applications. It is widely used to supply high quality, continuous and disturbance-free AC power to critical loads such as medical equipments, computers and communication systems. A good UPS system requires not only excellent steady state performances in terms of voltage regulation and total harmonic distortions (THD) regardless of unknown load disturbances but also a fast transient response during load step change. In this dissertation, a three-phase four-wire AC-DC-AC double conversion UPS system is first studied. Multi-loop control strategies are designed to regulate the system input currents, DC voltages, and output voltages. Next, study will deep dive into a DC-AC three-phase UPS inverter. A high performance repetitive controller (RC) for the voltage regulated three-phase inverter is proposed. The proposed control algorithm can eliminate all the periodic distortions and guarantees a high quality sinusoidal output voltage under unknown and severely distorted loads. A novel 4th-order linear phase infinite-impulse-response (IIR) filter is first used in the RC such that harmonic distortions up to the 19th order are rejected. In order to achieve fast response during step load transient while still maintaining the low THD feature, a modified synchronousframe approach with significantly reduced delay is later proposed and investigated. Grid-connected inverters utilizing renewable energy sources (e.g., photovoltaic, wind, fuel cell, etc.) are growing rapidly in recent years along with the constantly growing global demand for electricity. A grid-connected inverter injects a synchronously regulated sinusoidal current to the utility grid with required low THD and high power factor. Using an LCL filter in such a system has been recognized as a small size low cost solution due to its -60dB/dec high frequency attenuation. In this dissertation, a high-resonance-frequency LCL filter with minimal size and cost requirement is designed. A proportional plus repetitive control hybrid strategy is then proposed to achieve very low THD current regulation and high power factor. Although utility grid is often modeled as an infinite AC voltage source in inverter current control, it can introduce way more complicated resonance issues particularly when long transmission cables are used between the inverter and the main grid. A real example of an HVAC offshore wind farm system with long submarine cables is then investigated and emulated by a scaled-down 120Vac single-phase system. A systematic analysis is carried out and the key passive component parameters that cause high frequency resonances are identified. A notch filter based active damping control is proposed and implemented in the inverter. When a grid-connected inverter is sourced from photovoltaic (PV) panels, a front-end isolated DC-DC converter is usually incorporated and dedicated control must be employed based on the converter dynamics to achieve both maximum power point tracking (MPPT) and coordination with the 2nd-stage inverter control. A high performance system-level control scheme is designed for the proposed boost-half-bridge converter-inverter system in the PV application.
LINK COMPLETE THESIS
https://etd.lib.msu.edu/islandora/object/etd%3A2193
DIRECT LINK
https://etd.lib.msu.edu/islandora/object/etd%3A2193/datastream/OBJ/download/Advanced_inverter_control_for_uninterruptible_power_supplies_and_grid-connected_renewable_energy_applications.pdf
quinta-feira, 19 de janeiro de 2017
quarta-feira, 18 de janeiro de 2017
Assinar:
Postagens (Atom)