AUTOR DO BLOG ENG.ARMANDO CAVERO MIRANDA SÃO PAULO BRASIL

"OBRIGADO DEUS PELA VIDA,PELA MINHA FAMILIA,PELO TRABALHO,PELO PÃO DE CADA DIA,PROTEGENOS DO MAL"

"OBRIGADO DEUS PELA VIDA,PELA MINHA FAMILIA,PELO TRABALHO,PELO PÃO DE CADA DIA,PROTEGENOS  DO MAL"

“SE SEUS PROJETOS FOREM PARA UM ANO,SEMEIE O GRÂO.SE FOREM PARA DEZ ANOS,PLANTE UMA ÁRVORE.SE FOREM PARA CEM ANOS,EDUQUE O POVO.”

“Sixty years ago I knew everything; now I know nothing; education is a progressive discovery of our own ignorance. Will Durant”

https://picasion.com/
https://picasion.com/

sexta-feira, 17 de abril de 2020

Master Degree Thesis Data Analysis and Modeling for Fault Detection in Solar Photovoltaic (PV) System- Mokpo National University Department of Electronics Engineering-Author Prasis - 광전지(PV) 시스템의 고장 탐지를 위한 테이터 분석 및 모델링South Korea






Prasis Poudel A thesis Submitted for Partial Fulfilment of the Requirements for the Degree of Master of Engineering Department of Electronics Engineering 
Graduate School Mokpo National University August, 2017
 광전지(PV) 시스템의 고장 탐지를 위한 데이터
분석 및 모델링

ABSTRACT
This thesis presents the solar (PV) Power output data analysis and modelling using least mean square (LMS), linear regression and multiple linear regression algorithms and comparison between them to find the best model for applying in the PV system Fault detection. This method has been developed and validated using climatic and electrical output obtained from a SANYO 200 Wp photovoltaic modules installed at the Hae-Nam, Korea. This modelling includes the correlation of solar PV power output and solar irradiation. In modelling algorithms, PV power is modelled adaptively as a function of solar irradiation and each model is compared in terms of estimated error performance based on statistical and graphical methods. From the result, it was found that the multiple linear regression modelling is the best for solar PV modelling with MSE 0.00818 with modelling error 1.58% which is less than that compared to the model using the least Mean square (LMS) having 1.97% and linear regression 5.98%. ii | P a g e After successfully modelled, the solar Photovoltaic (PV) power output as a function of solar irradiance, resulting best model is used for the development of practical fault detection. Our modelling results had fairly low complexity with high fault detection rates. The fault detection is based on the analysis of the power losses using the linear regression modelling. The model estimated by stepwise linearity of the PV power output as a function of irradiance. The results obtained from this modelling indicate that the under normal condition the solar radiation and PV power output have a very strong positive correlation and very useful for solar PV data prediction. In addition, the observations below the proposed linear functions are considered as the faulty PV data. From Overall results, we can conclude that this PV system data modelling and fault detection approach is reasonable for PV power estimation and faulty data analysis.
LINK
http://www.riss.kr/search/detail/DetailView.do?p_mat_type=be54d9b8bc7cdb09&control_no=6310cda13afffe46ffe0bdc3ef48d419

domingo, 12 de abril de 2020

Deep Learning for Medical Imaging: COVID-19 Detection-MATLAB-MATHWORKS- Dr. Barath Narayanan


Barath Narayanan


Posted by Johanna Pingel, March 18, 2020

I'm pleased to publish another post from Barath Narayanan, University of Dayton Research Institute (UDRI), LinkedIn Profile. Co-author: Dr. Russell C. Hardie, University of Dayton (UD) Dr. Barath Narayanan graduated with MS and Ph.D. degree in Electrical Engineering from the University of Dayton (UD) in 2013 and 2017 respectively. He currently holds a joint appointment as a Research Scientist at UDRI's Software Systems Group and as an Adjunct Faculty for the ECE department at UD. His research interests include deep learning, machine learning, computer vision, and pattern recognition. In this blog, we are applying a Deep Learning (DL) based technique for detecting COVID-19 on Chest Radiographs using MATLAB.

 Background

 Coronavirus disease (COVID-19) is a new strain of disease in humans discovered in 2019 that has never been identified in the past. Coronavirus is a large family of viruses that causes illness in patients ranging from common cold to advanced respiratory syndromes such as Middle East Respiratory Syndrome (MERS-COV) and Severe Acute Respiratory Syndrome (SARS-COV). Many people are currently affected and are being treated across the world causing a global pandemic. In the United States alone, 160 million to 214 million people could be infected over the course of the COVID-19 epidemic (https://www.nytimes.com/2020/03/13/us/coronavirus-deaths-estimate.html). Several countries have declared a national emergency and have quarantined millions of people. Here is a detailed article on how coronavirus affects people: https://www.nytimes.com/article/coronavirus-body-symptoms.html

Detection and diagnosis tools offer a valuable second opinion to the doctors and assist them in the screening process. This type of mechanism would also assist in providing results to the doctors quickly. In this blog, we are applying a Deep Learning (DL) based technique for detecting COVID-19 on Chest Radiographs using MATLAB.

The COVID-19 dataset utilized in this blog was curated by Dr. Joseph Cohen, a postdoctoral fellow at the University of Montreal. Thanks to the article by Dr. Adrian Rosebrock for making this chest radiograph dataset reachable to researchers across the globe and for presenting the initial work using DL. Note that we solely utilize the x-ray images. You should be able to download the images from the article directly. After downloading the ZIP files from the website and extracting them to a folder called "Covid 19", we have one sub-folder per class in "dataset". Label "Covid" indicates the presence of COVID-19 in the patient and "normal" otherwise. Since, we have equal distribution (25 images) of both classes, there is no class imbalance issue here.

K-fold Validation

As you already know that there is a limited set of images available in this dataset, we split the dataset into 10-folds for analysis i.e. 10 different algorithms would be trained using different set of images from the dataset. This type of validation study would provide us a better estimate of our performance in comparison to typical hold-out validation method.

 We adopt ResNet-50 architecture in this blog as it has proven to be highly effective for various medical imaging applications [1,2].



 LINK
https://blogs.mathworks.com/deep-learning/2020/03/18/deep-learning-for-medical-imaging-covid-19-detection/

sexta-feira, 10 de abril de 2020

Analysis and Design of PV based Energy Storage System with Improved MPPT Algorithm-개선된 MPPT 기법을 적용한 PV 기반 에너지 저장 시스템의 설계와 해석














Analysis and Design of PV based Energy Storage System with Improved MPPT Algorithm-개선된 MPPT 기법을 적용한 PV 기반 에너지 저장 시스템의 설계와 해석 

 ABSTRACT

Analysis and Design of PV based Energy Storage System with improved MPPT Algorithm Paeng, Seong Il Department of Electrical Engineering Graduate School of Konkuk University

 Research and use of renewable energy is becoming more active due to the demand for reduction of carbon dioxide, which is the main cause of depletion of fossil fuels and global climate change, and regulation of the generation. However, Renewable energy using sunlight or wind power has a problem that it is adversely affecting the system due to irregularity of solar radiation or wind power, or it is difficult to operate efficiently. To overcome this problem, PV ESS (Photovoltaic Energy Storage System), which is used after storing power using a battery, has been actively studied. The operation method and control method of PV ESS linked with solar power generation and ESS are proposed into single phase and three phase in this PhD thesis. In the single phase system, during the daytime, the electric power generated from the photovoltaic power generation is used to supply power to the LED lamp, charge the battery, and transmit power to the grid when surplus power is generated. In the night, the - xii - LED lamp is supplied by the power stored in the battery, and the battery is charged by the grid power in the late night. In the daytime mode, technical improvements in Maximum Power Point Tracking(MPPT) algorithm is proposed for single phase photovoltaic Energy Storage System(PV ESS). The three-phase system performs a power leveling function to improve daytime and nighttime power uneven consumption and a function to level out the irregularities of solar power generation power. Therefore, during the day when the solar power is less than the set power, the battery replenishes the power. In the nighttime, battery power is used to transmit power to the system as much as the set value to be used in the load, and the battery is charged using surplus power of the night time. In case of power failure, three phase PV ESS is used as UPS (Uninterruptable Power Supply) function. This paper will contain two major sections which are briefed below. First, a single phase 3.3kW, 600W PV ESS system is designed and a control algorithm according to operating mode is proposed. And a three phase 15kW PV ESS system is designed and a control algorithm according to operation mode is proposed. Second, the MPPT algorithm is explained and the developed MPPT algorithms is proposed. Second, there are various MPPT algorithms in the paper which are reviewed and new MPPT algorithm based the P&O(Perturb and Observe) method is proposed. The proposed algorithms is carried out in simulation and have been validated in the prototype.

Keyword : Photovoltaic, Energy Storage System, Maximum Power Point Tracking

Photovoltaic Power Generation Control System Using MPPT and Android Programming-Pusan National University Department of Electrical and Computer Engineering Author Mallavarapu Sindhu


Thesis for the degree of Master of Science Photovoltaic Power Generation Control System Using MPPT and Android Programming
Supervisor Hee-Je Kim August 2017
The Graduate School Pusan National University Department of Electrical and Computer Engineering Author Mallavarapu Sindhu
LINK:http://www.mediafire.com/file/jc0t4c3pf1ry8lg/Photovoltaic_Power_Generation_Control_System_Using_MPPT_and_Android.pdf/file