Projeto de Filtro LC para Volume Mínimo Considerando as Perdas no Conversor e os Tempos de Vida dos Capacitores Aplicado a uma UPS de Dupla Conversão-Pedro C.Bolsi1,2, Edemar O.Prado1,2, João M.Lenz1,3, Hamiltom C.Sartori1, José RenesPinheiro1

Revista Eletrônica de Potência (Brazilian Journal of Power Electronics), published by SOBRAEP 

 PROJETO DE FILTRO LC PARA VOLUME MÍNIMO CONSIDERANDO AS PERDAS NO CONVERSOR E OS TEMPOS DE VIDA DOS CAPACITORES APLICADO A UMA UPS DE DUPLA CONVERSÃO 

Pedro C. Bolsi 1,2, Edemar O. Prado 1,2, João M. Lenz 1,3, Hamiltom C. Sartori 1, José Renes Pinheiro 1,2 1Universidade Federal de Santa Maria, Santa Maria – RS, Brasil 2Universidade Federal da Bahia, Salvador – BA, Brasil 3Universidade Federal da Integração Latino-Americana – PR, Brasil e-mail: pcbolsi@gmail.com, edemar.prado@ufba.br, jlenz@ieee.org, hamiltomsar@gmail.com, jrenes@gepoc.ufsm.br

• Pedro C. BolsiUniversidade Federal da Bahia, Salvador – BA, Brasilhttps://orcid.org/0000-0002-6425-1795
• Edemar O. PradoUniversidade Federal da Bahia, Salvador – BA, Brasilhttps://orcid.org/0000-0002-4438-032X
• João M. LenzUniversidade Federal da Integração Latino-Americana – PR, Brasilhttps://orcid.org/0000-0002-7349-4828
• Hamiltom C. SartoriUniversidade Federal de Santa Maria, Santa Maria – RS, Brasilhttps://orcid.org/0000-0002-7451-7411
• José Renes PinheiroUniversidade Federal de Santa Maria, Santa Maria – RS, Brasilhttps://orcid.org/0000-0001-9686-8004

Resumo–Este trabalho apresenta uma metodologiade projeto de filtrosLCanalisando o seu impactono conversor. Leva-se em consideração as perdas e ovolume do filtro, as perdas e o volume do conversor, ea vida útil dos capacitores. A metodologia é baseadana execução do dimensionamento físico (partnumbers,volume) e estimativa das perdas em cada parte dosistema, empregando modelos analíticos validadosexperimentalmente. A partir de um perfil de missão edas perdas nos capacitores, a vida útil é estimada para oscapacitores dos filtrosLCe barramento CC do conversor.O projeto é otimizado em função das perdas no sistema,volume total, e vida útil dos capacitores. Apontam-se osbenefícios da priorização de cada uma destas métricas.

VER TEXTO COMPLETO:

https://journal.sobraep.org.br/index.php/rep/article/view/190/166

Control convertidor dc-ac de 100kW Proyecto Final de Grado-Autor: Juan Carlos Olives Camps Tutor: Joan Rocabert Delgado 10/12/2013 Grado en Ingeniería Eléctrica – Escola d’Enginyers de Terrassa – UPC

 

Resumen

 Este proyecto desarrolla un estudio y diseño de un inversor trifásico que trabaja como fuente de corriente conectado a red. Tanto a nivel de hardware (los elementos físicos necesarios para su funcionamiento) como el desarrollo del software de control. A nivel de hardware se explicará la función de los componentes y estudiará la necesidad y las variables que determinan su dimensionado. Al mismo tiempo, el uso de convertidores de potencia conectados a red requiere la implementación de un adecuado sistema de filtrado. Es por este motivo que en este proyecto se dedicarán unas líneas al diseño de este. A nivel de software se pretende desarrollar una evolución, en cuanto a complejidad, del sistema de control así como las etapas necesarias para el desempeño de su función. Se presentarán los resultados obtenidos mediante la simulación de los circuitos y los resultados experimentales del testeo de un inversor real. Las etapas de control y software se realizarán para un inversor de 100kW, mientras que el dimensionado de los elementos de hardware se llevará a cabo para uno de 50kW. Finalmente, los ensayos realizados sobre el inversor serán realizados controlando un convertidor de 10kW. Abstract This project develops the study and design of a three-phase inverter connected to the grid working as a current source. Both hardware level (the physical elements necessary for its operation) as the development of the control software. About the hardware level, the role of the components and the need for their existence will be explained as the variables that determine its sizing. The use of power converters connected to the grid requires the implementation of a suitable filtering system. For this reason, a few lines of this project will try to explain the filter design. The study about de software level will try to develop an evolution, in terms of complexity, of the control system as well as the steps needed to carry out its work. The results obtained by simulating the circuits and experimental results of testing will be presented and compared. Control stages and software will be performed for a 100kW inverter; however, the sizing of the hardware elements will be calculated for one of 50kW. Finally, testing of the inverter will be carried out by controlling a 10kW converter.

VIEW FULL TEXT:

https://upcommons.upc.edu/bitstream/handle/2099.1/22030/juan.carlos.olives_90712.pdf?sequence=1&isAllowed=y

QUANTUM Magazine -Quantum was a sister publication of the Russian magazine Kvant. Quantum contained translations from Kvant and original material.

 

VIEW FULL TEXT:  https://www.mediafire.com/file/i9ljj7vwwxfcyek/QuantumV11N3.pdf/file

Improving voltage imbalance in inverter-based islanded microgrids during line-to-line short circuits- Miguel Castilla, Jaume Miret, Luis García de Vicuña, Ángel Borrell, Carlos AlfaroDepartment of Electronic Engineering, Universitat Politècnica de Catalunya, Vilanova i la Geltrú, Spain Department of Electric Engineering, Escola Universitària Salesiana de Sarrià, Barcelona, Spain-

 Abstract

 Line-to-line short circuits are the transient disturbances that cause the highest currents as well as the largest voltage imbalances in inverter-based microgrids. This paper presents a control scheme for grid-forming inverters in islanded microgrids that limits the current to a safe value during these types of short circuits while providing a lower voltage imbalance compared to state-of-the-art current limiting techniques. This control scheme is based on reducing both the amplitude of the reference voltage with the maximum amplitude of the reference current and the instantaneous reference voltage with only the inductive component of the virtual impedance. The combination of these two control actions provides low voltage imbalance, as the theoretical and experimental studies reveal. This voltage imbalance improvement is the main contribution of this paper and is maintained when the microgrid supplies linear and non-linear loads. In the theoretical study, the paper includes control design guidelines to satisfy static and dynamic specifications. The theoretical predictions are validated by means of experimental results measured in a laboratory microgrid. A practical performance comparison of current limiting techniques based on experimental tests is also reported

VIEW FULL TEXT:

https://upcommons.upc.edu/handle/2117/387136

“Active Gate Switching Control of IGBT to Improve Efficiency in High Power Density Converters” Thesis submitted in partial fulfilment of the requirement for the PhD degree issued by the Universitat Politècnica de Catalunya, in its Electronic Engineering Program

 “Active Gate Switching Control of IGBT to Improve Efficiency in High Power Density Converters” 

Thesis submitted in partial fulfilment of the requirement for the PhD degree issued by the Universitat Politècnica de Catalunya, in its Electronic Engineering Program 

by Hamidreza Ghorbani 

Director: Dr. Prof. Jose Luis Romeral Martinez Co-Director: Dr. Eng. Vicent Sala

Abstract 

Insulated gate bipolar transistor (IGBT) power semiconductors are widely employed in industrial applications. This power switch capability in high voltage blocking and high current-carrying has expanded its use in power electronics. However, efficiency improvement and reducing the size of products is one of main tasks of engineers in recent years. In order to achieve high-density power converters, attentions are focused on the use of fast IGBTs. Therefore, for achieving this desire the trend is designing more effective IGBT gate drivers. In gate drive (GD) controlling, the main issue is maintaining transient behavior of the MOS-channel switch in well condition; when it switches fast to reduce losses. It is well known that fast switching has a direct effect on the efficiency improvement; meanwhile, it is the major reason of appearing electromagnetic interference (EMI) problems in switched-mode power converters. Nowadays the most expectant of an active gate driver (AGD) is actively adjusting the switching transient through simple circuit implementation. Usually its performance is compared with the conventional gate driver (CGD) with fixed driving profile. As a result a proposed AGD has the capability of increasing the switching speed while minimizing the switching stress. Different novel active gate drivers (as feed-forward and closed-loop topologies) have been designed and analysed in this study. To improve the exist trade-off between switching losses and EMI problem, all effective factors on this trade-off are evaluated and considered in proposed solutions. Theoretical developments include proposed controlling methods and simulated efficiency of IGBTs switching control. The efficiency improvement has been pursued with considering EMI study in the proposed active gate controller. Experimental tests have been conducted to verify the design and validate the results. Beside technical aspects, cost study has also considered in the closed-loop GD. The proposed gate drivers are simple enough to allow its use in real industrial applications.

VIEW FULL TEXT:

https://upcommons.upc.edu/bitstream/handle/2117/168574/THG1de1.pdf