AUTOR DO BLOG ENG.ARMANDO CAVERO MIRANDA SÃO PAULO BRASIL

GIF 1 GIF 2

“GRAÇAS A DEUS PELA VIDA,PELA MINHA FAMÍLIA,PELO TRABALHO.PELO PÃO DE CADA DIA,POR NOS PROTEGER DO MAL”

“SE SEUS PROJETOS FOREM PARA UM ANO,SEMEIE O GRÂO.SE FOREM PARA DEZ ANOS,PLANTE UMA ÁRVORE.SE FOREM PARA CEM ANOS,EDUQUE O POVO”

https://picasion.com/
https://picasion.com/

sexta-feira, 9 de maio de 2014

PREMIO QUALIDADE MARCAS DE PRODUTOS ELETRICOS 2014 BRASIL

PREMIO QUALIDADE 2014
A PESQUISA APONTA AS MARCAS DE MATERIAIS ELETRICOS QUE CONQUISTARAM IMAGEM DE QUALIDADE
JUNTO AOS PROFESSIONAIS DE ELETRICIDADE E SEU DESEMPENHO AO LONGO DOS ANOS.  
SOURCE: REVISTA ELETRICIDADE MODERNA ARANDA EDITORA
ANO 42  - N° 478 JANEIRO 2014
LINK
http://www.arandanet.com.br/midiaonline/eletricidade_moderna/2014/janeiro/index.html 

quinta-feira, 8 de maio de 2014

Evaluation of a Low-Cost Permanent Emergency Lighting System Based on High-Efficiency LEDs


Manuel Rico-Secades, Member, IEEE, Antonio J. Calleja, Member, IEEE, Javier Ribas, Member, IEEE, Emilio L. Corominas, Member, IEEE, J. Marcos Alonso, Senior Member, IEEE, Jesús Cardesín, Member, IEEE, and Jorge García-García, Student Member, IEEE
Abstract
Nowadays, Permanent Emergency Lighting Systems (PELSs) are widely used in many applications, including emergency exit indication and lighting in critical or strategic points. Limitation in operation hours in classical lamps (10 000–20 000 h for fluorescent lamps) implies short lamp replacement times and, therefore, high maintenance costs. This paper shows an alternative solution based on high-efficiency LEDs. The long operation life (above 100 000 h) of high-efficiency LEDs with a very simple electronics circuitry implies an interesting solution for these types of applications. A 30-lm and 1-h PELS has been built and tested. A low-cost power supply has been built and used as a battery charger and LED driver.
LINK
https://www.mediafire.com/?x0oi808j3o4odv3

A Three-in-One Converter for Regular and Emergency Lighting Applications Yung-Chun Wu and Yu-Kai Chen,


 
A Three-in-One Converter for Regular and Emergency Lighting Applications Yung-Chun Wu and Yu-Kai Chen,
Abstract—This paper presents a three-in-one converter for regular and emergency lighting applications. The converter can function as regular ballast, emergency ballast, and battery charger/discharger, achieving regular and emergency lighting features. The three-in-one converter used in the ballast is an integration of a bidirectional flyback converter and two half-bridge series-resonant parallel-loaded inverters. The derivation and operating principle of the proposed converter are first presented, and an application to regular and emergency lighting is then developed. With the proposed converter and a single-chip microcontroller EM78P458, a low cost multifeature electronic ballast can be readily implemented and installed. Hardware measurements have verified its feasibility and the desired features.
LINK
https://www.mediafire.com/?4l8c0t2tx45c03q

quinta-feira, 1 de maio de 2014

quarta-feira, 30 de abril de 2014

FUNDAMENTOS DE LA TECNOLOGIA DE CONVERSION Popkov OZ


Los principios de la conversión de energía eléctrica - la rectificación ,los inversores, la conversión de frecuencia.
LINK 
http://www.mediafire.com/view/af1e51hdz0ym21l/FUNDAMENTOS_TECNOLOGIA_CONVERSION.pdf 

FUNDAMENTALS OF POWER ELECTRONICS G. S. ZINOVIEV NOVOSIBIRSK STATE TECHNICAL UNIVERSITY

 General information
 Place of work:
 Industry Research Laboratory energooptimizatsii transducer systems supervisor
 Department of Electronics and Electrical Engineering, Professor
NOVOSIBIRSK STATE TECHNICAL UNIVERSITY
Professor
Gennadiy Stepanovich Zinoviev
Author's website: http://ciu.nstu.ru/kaf/283
 Disciplines:
 2014
 Introduction to Industrial and power electronics
 Research Practice
 Research work in the semester
 Fundamentals of Power Electronics
 Educational Practices
 Electromagnetic compatibility of power electronics devices

Zinoviev Gennadiy Stepanovich, who was born in Novosibirsk.  After high school he entered the NSTU (NETI) specialty Promelectronica and graduated with honors and a degree in electrical engineering.  In 1963-1966 years.  graduate student of industrial electronics NSTU, Ph.D. (1967), Senior Lecturer, Associate Professor (1968), Ph.D. (1988) in the present - Professor (since 1989) of the department NSTU industrial electronics, scientific adviser NEIL "Energooptimizatsii converting systems."  'm Courses "Fundamentals of Power Electronics", "Electromagnetic compatibility of power electronics devices", "Industrial Electronics" and even before "Basic scientific research".

 BOOK LINK
https://www.mediafire.com/?ckitxpd0ua118lx






domingo, 20 de abril de 2014

MACHINES ÉLECTRIQUES Cours et Problèmes Claude CHEVASSU


MACHINES ÉLECTRIQUES
Cours et Problèmes
Claude CHEVASSU


Introduction - Généralités
0.1 Introduction
Nomde l’auteur : Claude CHEVASSU;
Titre : Machines électriques : cours et problèmes ;
Date : 20 juillet 2012
Date : 20 juillet 2012
Copyleft : ce manuel est libre selon les termes de la Licence Libre :http://cesarx.free.fr/gfdlf.html
Ce cours a été rédigé avec LATEXet The Gimp pour la retouche des images. Ce
cours est sous licence libre, c’est-à-dire qu’il peut être copié et qu’il peut être
diffusé à condition :
– d’indiquer qu’il est sous la Licence Libre ;
– d’indiquer le nom de l’auteur de l’original : Claude CHEVASSU et de ceux
qui auraient apporté des modifications ;
– d’indiquer que les sources peuvent être téléchargés sur http://mach.elec.free.fr
Enfin vous pouvez le modifier à condition :
– de respecter les conditions de diffusion énoncées ci-dessus ;
– d’indiquer qu’il s’agit d’une version modifiée et d’indiquer la nature et la
date de la modification ;
– de diffuser vos modifications sous la même licence.
Cet ouvrage est en grande partie basée sur le cours [MIN81] dispensé par
mon maître en génie électrique lorsque j’étais élève à l’École Navale :Monsieur
Minot à qui je doisma vocation !
Ce cours, à destination des élèves officiers de première classe et futurs ingénieurs
mécaniciens de la marine marchande, ne présente que le fonctionnement
en régime permanent des machines électriques ignorant les problématiques
des régimes transitoires. L’ingénieur mécanicien est l’« exploitant »
de l’installation électrique du navire et il est parfois confronté à des pannes
vicieuses. Dans ces cas, seule une très bonne connaissance des principes de
bases permet de trouver l’origine du dysfonctionnement.
ORIGINAL WEBSITE BOOK TELECHARGER DOWNLOAD

http://mach.elec.free.fr/electricite/cours-machines-electriques.pdf

sábado, 19 de abril de 2014

Power Transformer Modeling for Inrush Current Calculation Nicola Chiesa Doctoral theses at NTNU, 2010

Nicola Chiesa
Power Transformer Modeling for Inrush Current Calculation

Thesis for the degree of Philosophiae Doctor
Trondheim, June 2010
Norwegian University of Science and Technology
Faculty of Information Technology,
Mathematics and Electrical Engineering
Department of Electric Power Engineering

ORIGINAL WEBSITE
http://ntnu.diva-portal.org/smash/get/diva2:322811/FULLTEXT02.pdf


MODELAGEM DE TRANSFORMADORES NO PROGRAMA ATP PARA O ESTUDO DO FENÔMENO DA FERRORRESSONÂNCIA LISSANDRO BRITO VIENA

MODELAGEM DE TRANSFORMADORES NO PROGRAMA ATP
PARA O ESTUDO DO FENÔMENO DA FERRORRESSONÂNCIA

LISSANDRO BRITO VIENA

Dissertação apresentada ao Programa de Pós-
Graduação em Engenharia Elétrica da Universidade
Federal da Bahia, como requisito parcial para
obtenção do grau de Mestre em Engenharia Elétrica.
Orientador: Prof. Dr. Fernando Augusto Moreira
Co – orientador: Prof. Dr. Niraldo Roberto Ferreira

Salvador-BAHIA-BRASIL
2010

ORIGINAL WEBSITE
http://www.ppgee.eng.ufba.br/teses/76773e5fb517369696e3eba6d56e67da.pdf

Curso de Técnico em Eletrotécnica Máquinas Elétricas - SENAI - BRASIL

CURSO TECNICO EM ELETROTÉCNICA
MAQUINA ELÉTRICA
ORIGINAL LINK
http://www.sc.senai.br/admin/documentos/pda/SENAISC-SaoBentodoSul20110204154134maquinaseletricasreduz.pdf

Power Transformer Modelling Advanced Core Model POLITECNICO DI MILANO Facoltà di Ingegneria Dipartimento di Elettrotecnica

Power Transformer Modelling
Advanced Core Model

Relatore
Prof. Francesco CASTELLI DEZZA
POLITECNICO DI MILANO - ITALIA
Facoltà di Ingegneria
Dipartimento di Elettrotecnica

Scopo del lavoro La tesi fa parte di un progetto che studia gli effetti dalla saturazione su un trasfor- matore di potenza. L’obiettivo è lo sviluppo di un modello di trasformatore per EMTP-type software. Lo studio è focalizzato sulla bassa frequenza dove la satu- razione è un rischio. Il modello sviluppato potrà essere usato per la simulazione di transitori nelle reti elettriche e sarà un utile strumento per lo studio di transitori di commutazione e inrush currents. Per poter predire sollecitazioni elettromagnetiche sui trasformatori devono es- sere instaurati nuovi modelli. Gli attuali modelli di trasformatori trifase presenti nei programmi di simulazione sono basati su trasformatori monofasi. Questi non tengono conto delle differenze e degli accoppiamenti tra le fasi dovute alla strut- tura del nucleo magnetico. Anche la rappresentazione di isteresi, perdite anomale e magnetizzazione residua deve essere migliorata. Il maggior problema per la carat- terizzazione di modelli avanzati è la mancanza di dati; essi, tipicamente contenuti nelle schede tecniche, risultano spesso insufficienti a descrivere un accurata curva di saturazione. Aspetti innovativi presentati in questa te
FULL THESIS
http://www.elkraft.ntnu.no/~chiesa/Files/MasterThesis_Chiesa.pdf

TESI DI DOTTORATO Models and methods for the design of isolated power converters in high-frequency high-efficiency applications



 TESI DI DOTTORATO
Models and methods for the design of isolated power converters in high-frequency high-efficiency applications
CANDIDATO: GIULIA DI CAPUA
Università degli Studi di Salerno - ITALIA
Dipartimento di Ingegneria Elettronica ed Ingegneria Informatica
Dottorato di Ricerca in Ingegneria dell’Informazione
LINK1
https://www.mediafire.com/?9czbwhydx3h795d

quinta-feira, 17 de abril de 2014

Modelagem de lâmpadas de descarga: uma análise de desempenho considerando parâmetros de qualidade da energia Autor Principal: Andreoli, André Luiz






Modelagem de lâmpadas de descarga: uma análise de desempenho considerando parâmetros de qualidade da energia

Autor Principal: Andreoli, André Luiz

Tese de Doutorado
Documento
Autor
Nome completo
André Luiz Andreoli
Unidade da USP
Área do Conhecimento
Data de Defesa
Imprenta
São Carlos, 2011
Orientador
Banca examinadora
Coury, Denis Vinicius (Presidente)
Almeida, Madson Cortes de
Marafão, Fernando Pinhabel
Oleskovicz, Mario
Serni, Paulo Jose Amaral
Título em português
Modelagem de lâmpadas de descarga: uma análise de desempenho considerando parâmetros de qualidade da energia
 
FULL THESIS