ELEKTRONIK-TURQUIA

Hakkında320volt.com Blog Türkiye`de bilişim ve elektronik ile ilgilenen Türkiye nin gelişmesini sağlayacak güzel insanlarımıza hizmet etmek için kurulmuştur. Tüm içerikten üye olmadan faydalanabilir, makale ve projelerinizi paylaşabilirsiniz

REVIEW OF PV INVERTER TECHNOLOGIES FOR PRACTICAL IMPLEMENTATION

REVIEW OF PV INVERTER TECHNOLOGIES FOR PRACTICAL
IMPLEMENTATION
Kuo-Lung Chai, Yue-Chun Lin, Jing-Fong Hsu, and Ying-Yu Tzou
Power Electronics IC Design and DSP Control Lab.,
Dept. of Electrical and Control Engineering, National Chiao Tung Univ., Hsinchu, Taiwan

RALE ENGINEERING VIDEO DEMO

TRANSFORMER DESIGN SOFTWARE VIDEO DEMO
RATIBUR HADZIMANOVIC .DIPL. ING.

RALE ENGINEERING

RALE Distribution and Power Transformer Design Software and Inductor Design Software .


Using the RALE distribution and power transformer design software and/or inductor design software can improve both your quality of life and your company profit because the RALE distribution and power transformer and inductor design software is world's best design software for power transformers and inductors.Also, we will provide you with the updates and absolutely the best cost-free technical support and consulting - it does not matter where in the world you are located.RALE distribution and power transformer design software "speaks" 5 languages (English, French, German, Spanish, and Italian), supports metric and USA units and it is so powerful and universal that there is no standard which can not be supported. (IEC,EN,UL,VDE,SEV,CSA,...)
In order to demonstrate power of the RALE distribution and power transformer and inductor design software RALE has selected some representative design examples of distribution and power transformer applications in a wide range of frequencies and power: 10Hz...500kHz, 0.1VA...10MVAAdditionally, since 1996 RALE offers design service and for demo purpose a worldwide unique , on-line, cost-free 15 day trial via the internet. In order to run the RALE distribution and power transformer and inductor design software on your computer or in your network you do not need to buy it. You can rent it on a low level investmentWorldwide we are the family of more than 200 successful users

A Novel Driving and Protection Circuit for REVERSE BLOCKING IGBT USING IN MATRIX CONVERTER

A Novel Driving and Protection Circuit for
Reverse-Blocking IGBT Used in Matrix Converter
Daning Zhou, Kai Sun, Student Member, IEEE, Zhichao Liu, Lipei Huang,
Kouki Matsuse, Fellow, IEEE, and Kiyoaki Sasagawa

V. CONCLUSION
This paper has discussed a novel drive and protection circuit
designed for RB-IGBT.
1) A novel drive circuit was proposed to solve the conflict
between restricting di/dt of collector current in
turn-on transitions, dv/dt of collector–emitter voltage in
IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, VOL. 43, NO. 1, JANUARY/FEBRUARY 2007
Fig. 20. Performance of the matrix converter in 50-Hz output frequency and
4.5-Nm load condition. (a) Input phase voltage νa, phase current ia, and its fast
Fourier transform (FFT). (b) Output line voltage νAC, output current iA, and
its FFT.
turn-off transitions, and reducing turn-on/off intervals
that are existing in conventional drive circuits. Experimental
results show that the proposed circuit can work
as the hope.
2) A novel protection circuit was designed. The Ic sensing
unit of this circuit is specifically designed for an RBIGBT.
Experimental results show that the short-circuit
FUL condition can be handled properly. The problem is
that the value of the large resistance used to import Vce
of RB-IGBT is difficult to determine. It should be high
enough to reduce its power losses. However, it should be
controlled to reduce the response time in case a shortcircuit
fault occurs.
3) A three-phase-to-three-phase matrix converter was set up.
The proposed collector current sensing method is found
useful to produce the output current direction signals,
which are necessary to implement the current-sign-based
four-step commutation method.
The future work includes the following.
1) Simplify the proposed drive circuit to reduce the cost.
2) Investigate the effects of the variations of component
parameters on the performance of the proposed drive and
protection circuit.
ACKNOWLEDGMENT
The authors would like to thank Dr. H. Shigekane,
Dr. S. Igarashi of Fuji Electric Device Technology Company,
Ltd., and Y. Abe, and M. Takei of Fuji Electric Advanced
Technology Company, Ltd. for their kind support of this project.