Performance Analysis of Doubly-fed Induction Generator in Wind Energy Conversion SYSTEM

Performance Analysis of Doubly-fed Induction Generator in Wind Energy Conversion

A Thesis Submitted in Partial Fulfillment of the Requirements for the
Award of the Degree of
Master of Technology
in
Electrical Engineering
(Power Control & Drives)
Choudhury, Satish (2011) Performance Analysis of Doubly-fed Induction Generator in Wind Energy Conversion System.
NATIONAL INSTITUTE OF TECHNOLOGY ROURKELA
राष्ट्रीय प्रौधोगिकी संस्थान राउरकेऱा
PIN-769008
ODISHA, INDIA
June 2011
FULL THESIS HERE:
http://www.mediafire.com/file/i9z18qegaj80zzd/Final_thesis_satish.pdf

PROJECT REPORT ON POWER ELECTRONICS COMPUTER SIMULATION AND ANALYSIS

FULL TEXT:
http://www.mediafire.com/file/bvsfzj4g65dnv6t/FINAL_REPORT1.pdf

PROJECT REPORT ON
POWER ELECTRONICS COMPUTER SIMULATION AND ANALYSIS

Ravi Shankar Singh (10502024)
Byaktiranjan Pattanayak (10502030)
Shankar Kumar (10502036

ELECTRICAL ENGINEERING DEPARTMENT
NATIONAL INSTITUTE OF TECHNOLOGY
ROURKELA
CERTIFICATE

IGBTs at Higher Operation Temperature

www.bodospower.com September 2011
IGBTs at Higher Operation Temperature Impact on inverter design
The development of IGBT power modules has always been characterized by the
continuous increase of the power density for cost reduction and design optimization
of the complete frequency converter system [1]. The requirement of higher power density
is directly associated with increased current per chip area and therefore an increase of
the junction temperature during the operation is expected.
By Klaus Vogel, Alexander Ciliox and Andreas Schmal,
Infineon Technologies AG, Warstein, Germany

Unified power quality conditioner for grid integration of wind generators

Unified Power Quality Conditioner
for Grid Integration ofWind Generators
Jayanti Navilgone Ganesh, B.E.
A thesis submitted for the degree of Doctor of Philosophy
to the Dublin Institute of Technology
School of Electrical Engineering Systems
Dublin Institute of Technology
Kevin Street, Dublin 8
IRELAND
DOWNLOAD :

http://www.mediafire.com/file/fr3syiyddp4kx14/Unified%20power%20quality%20conditioner%20for%20grid%20integration%20of%20wind%20ge.pdf

CARACTERIZAÇÃO E MODELAGEM ELETROMAGNÉTICA DE LÂMINAS DE AÇO AO SILÍCIO

CARACTERIZAÇÃO E MODELAGEM ELETROMAGNÉTICA DE LÂMINAS DE AÇO AO SILÍCIO

Tese submetida à
Universidade Federal de Santa Catarina
como parte dos requisitos para a
obtenção do grau de Doutor em Engenharia Elétrica.
UNIVERSIDADE FEDERAL DE SANTA CATARINA-BRASIL
PROGRAMA DE PÓS-GRADUAÇÃO EM ENGENHARIA ELÉTRICA
NELSON JHOE BATISTELA
Orientador: Nelson Sadowski, Dr.
Co-orientador: Renato Carlson, Dr.
Área de Concentração: Sistemas de Energia
TESE COMPLETA:
http://www.mediafire.com/file/2qob28gr8xyijxj/PEEL0707.pdf