AUTOR DO BLOG ENG.ARMANDO CAVERO MIRANDA SÃO PAULO BRASIL

"OBRIGADO DEUS PELA VIDA,PELA MINHA FAMILIA,PELO TRABALHO,PELO PÃO DE CADA DIA,PROTEGENOS DO MAL"

"OBRIGADO DEUS PELA VIDA,PELA MINHA FAMILIA,PELO TRABALHO,PELO PÃO DE CADA DIA,PROTEGENOS  DO MAL"

“SE SEUS PROJETOS FOREM PARA UM ANO,SEMEIE O GRÂO.SE FOREM PARA DEZ ANOS,PLANTE UMA ÁRVORE.SE FOREM PARA CEM ANOS,EDUQUE O POVO.”

“Sixty years ago I knew everything; now I know nothing; education is a progressive discovery of our own ignorance. Will Durant”

https://picasion.com/
https://picasion.com/

segunda-feira, 14 de agosto de 2017

NO-BREAK SOLAR OFF-GRID HIBRIDO LANÇAMENTO NA EXPOSEC 2017 SÃO PAULO BRASIL




Potências: 5.000 a 10.000W

Alta confiabilidade: Controle microprocessado DSP, combinando tecnologia SPWM e chaveamento de potência em alta frequência
Modo de operação selecionável: Prioridade armazenamento ou fornecimento de energia Prevenção de danos: por atenuação PID garantindo a vida útil plena dos painéis fotovoltaicos
 Gerenciamento de baterias: Carregador com três estágios, reduzindo o tempo de recarga e protegendo contra descarga profundal de baterias
Alimentação: AC: com sincronismo on-line, minimizando o tempo de transfência garantindo o fornecimento de energia à carga
Seleção automática: de frequência (60/50Hz)
Comunicação inteligente: RS232 ou USB (SNMP opcional)

sexta-feira, 11 de agosto de 2017

Peruanos crean minisatélite y ganan premio en Francia-ESTUDIANTES DE LA UNIVERSIDAD NACIONAL DE INGENIERIA LIMA PERU

SEMIKRON - REVISTA POTÊNCIA Webinar gratuito: Como definir seus semicondutores de potência 22 AGOSTO 7:PM


No dia 22 de agosto acontecerá o primeiro webinar da parceria entre a empresa SEMIKRON e a Revista Potência, o tema escolhido é "Como definir seus semicondutores de potência". Esse webinar contará com três especialistas da SEMIKRON: - Eng. Fábio Miura - Eng. Maurício Falsetti - Eng. Ricardo Prado Data: 22 de agosto Horário: 19h00 Inscreva-se gratuitamente: 

https://lnkd.in/ezMYbHZ

domingo, 30 de julho de 2017

Magnetic and Electric Characterization of Materials for Electrical Machines by M.S.Muhit -Royal Institute of Technology School of Electrical Engineering Electrical Machines and Power Electronics






Magnetic and Electric Characterization of Materials for Electrical Machines 
by M.S.Muhit
 Master Thesis
Royal Institute of Technology School of Electrical Engineering Electrical Machines and Power Electronics Stockholm, August 2011
 Abstract
This thesis aims to characterize materials for electrical machines. Electromagnetic properties (b-h curves) and electrical resistivity were the main properties investigated in the project work. Two types of samples are considered: stator lamination sheet and rings made of steel used for structural pieces in large AC machines. To facilitate magnetic characterization experiments, an existing test setup was upgraded. Sensors and amplifiers have been developed. The control system has been upgraded and developed SIMULINK modules have been adapted to dSPACE GUI. The retrieved ‘B’ and ‘H’ signals are processed offline to obtain the results. The lamination sheet has been tested for frequencies in the range [0.1-150 Hz] and flux density levels up to 1.5 T. The obtained results depict characteristics hysteresis curves and measured loss figures. The ring samples (structural steel) are characterized to explore the B-H curves at frequencies in the range [0.1-250 Hz] and field intensity up to 900 A/m. For resistivity measurements of the lamination sheets and ring samples, standard resistivity measurement techniques have been implemented. Keywords Magnetic properties, Epstein frame, hysteresisgraph, four point probe, resistivity measurement, soft magnetic material, electrical steel.
VIEW FULL TEXT
http://www.diva-portal.org/smash/get/diva2:470656/fulltext01

Measurement research on magnetic properties of electrical sheet steel under different temperature, harmonic and dc bias Dezhi Chen - Li wei Fang - Byung-il Kwon School of Electrical Engineering, Shenyang University of Technology




Measurement research on magnetic properties of electrical
sheet steel under different temperature, harmonic
and dc bias
Dezhi Chen - Li wei Fang - Byung-il Kwon
School of Electrical Engineering, Shenyang University of Technology,
 Shenyang, China


I. INTRODUCTION 
The phenomena such as the DC power grid, geomagnetic storms change, DC voltage of converter transformer may result in DC bias. Then the DC bias leads to the magnetic leakage flux increase in cores, metal structure losses, temperature rise, local overheating, dielectric breakdown, noise vibration, even the permanent damage to transformer.1 Meanwhile, the rise of temperature and harmonic will also affect the magnetic properties of electrical sheet steel. Manufacturers of electrical sheet steel can provide magnetic parameters, such as loss of iron core, that usually are measured at room environment temperature. The measured electromagnetic performance of transformer has a certain error compared with the actual operation temperature.2 When temperature, harmonic and DC bias change at the same time, the transformer operation condition will be more complicated. This paper is the first time to present the measurement research on the magnetic properties of oriented electrical sheet steel considering both different temperature and DC bias, and it shows the curve of magnetic properties under different temperatures (40 °C to 150 °C), frequency(50Hz to 4.5kHz) and DC bias (0A to 2.0A). It can provide a useful guidance for the design and optimization of power transformer

LINK ORIGINAL
http://aip.scitation.org/doi/pdf/10.1063/1.4979490