terça-feira, 7 de setembro de 2010
HEATSINK CONCEPS AND CASE STUDIES
HEATSINK CONCEPS AND CASE STUDIES
G.DhanushKodi Scientist 'C', SAMEER,Chennai
FULL PAPER HERE:http://www.nampet.org/event_efiles/report_23.zip
Design and Implementation of Parallel Operation of Inverters
Design and Implementation of Parallel Operation of
Inverters with Instantaneous Current Sharing Scheme
Using Multiloop Control Strategy on FPGA Platform
A thesis submitted in partial ful llment of the requirements
for the degree of Master of Technology by Shahil Shah
to the
Department of Electrical Engineering
Indian Institute of Technology, Kanpur
July 2008.
The content of this thesis find it on the websites:http://www.nampet.org/Nampet/files2009/shahil_report.pdf
segunda-feira, 6 de setembro de 2010
Dynamic Voltage Regulator
Dynamic Voltage Regulator
Static Voltage Stabilizer (or Dynamic Voltage Regulator DVR) developed by MEDI is a direct conversion AC-AC SMPS which will give a 220V constant AC output from an unregulated AC input 90-270V.
Static Voltage Stabilizer (or Dynamic Voltage Regulator DVR) developed by MEDI is a direct conversion AC-AC SMPS which will give a 220V constant AC output from an unregulated AC input 90-270V.
Mosfet_or_IGBT_Driver IC 2101.avi
Mosfet_or_IGBT_Driver IC 2101.avi
Driving a mosfet or an IGBT in a half bridge configuration requires a driver as the top mosfet or IGBT has to get the DC supply from an isolated source.Understanding its use helps writting its input program and output use for inverters ,converters erc .
Driving a mosfet or an IGBT in a half bridge configuration requires a driver as the top mosfet or IGBT has to get the DC supply from an isolated source.Understanding its use helps writting its input program and output use for inverters ,converters erc .
Energy Efficiency in India: Challenges and Initiatives
Energy Efficiency in India: Challenges and Initiatives
BerkeleyLab 20 de maio de 2010
May 13, 2010 EETD Distinguished Lecture: Ajay Mathur is Director General of the Bureau of Energy Efficiency, and a member of the Prime Minister's Council on Climate Change. As Director General of BEE, Dr. Mathur coordinates the national energy efficiency programme, including the standards and labeling programme for equipment and appliances; the energy conservation building code; the industrial energy efficiency programme, and the DSM programmes in the buildings, lighting, and municipal sectors.
BerkeleyLab 20 de maio de 2010
May 13, 2010 EETD Distinguished Lecture: Ajay Mathur is Director General of the Bureau of Energy Efficiency, and a member of the Prime Minister's Council on Climate Change. As Director General of BEE, Dr. Mathur coordinates the national energy efficiency programme, including the standards and labeling programme for equipment and appliances; the energy conservation building code; the industrial energy efficiency programme, and the DSM programmes in the buildings, lighting, and municipal sectors.
How to Bring Solar Energy to Seven Billion People
How to Bring Solar Energy to Seven Billion People-COMO TRAER ENERGIA SOLAR PARA 7 BILLONES DE PERSONAS .
PALESTRA INTERESANTE DO BERKELEY LAB,EL ARTIGO COMPLETO LO ENCUENTRAS EN EL SITE:http://www.rdmag.com/Multimedia/Video/2010/05/energy-how-to-bring-solar-energy-to-seven-billion-people/
PALESTRA INTERESANTE DO BERKELEY LAB,EL ARTIGO COMPLETO LO ENCUENTRAS EN EL SITE:http://www.rdmag.com/Multimedia/Video/2010/05/energy-how-to-bring-solar-energy-to-seven-billion-people/
domingo, 5 de setembro de 2010
PCIM 2010 EUROPE ON VIDEO
PCIM Europe 2010 Video Archive Now Online
From May 4 through 6, Techcast was at the Power Conversion Intelligent Motion (PCIM) Europe 2010 trade show in Nuremberg to record 70 presentations. Online access to the video archive for this international exhibition and conference is now available immediately for a fee.
http://www.techcast.com/en/news/20/62/PCIM-Europe-2010-Video-Archive-Now-Online/
From May 4 through 6, Techcast was at the Power Conversion Intelligent Motion (PCIM) Europe 2010 trade show in Nuremberg to record 70 presentations. Online access to the video archive for this international exhibition and conference is now available immediately for a fee.
http://www.techcast.com/en/news/20/62/PCIM-Europe-2010-Video-Archive-Now-Online/
sábado, 4 de setembro de 2010
SiC Power Module
The High-temperature SiC Power Module was first marketed via a public press
release and floor demonstration at CEATEC 2008 (Combined Exhibition of
Advanced Technologies), Japan’s premiere electronics trade show. CEATEC took
place September 30–October 4, 2008, in Makuhari, Japan.
Product’s Primary Function
Power electronics modules are the core components of all power electronics
systems. In essence, power electronics systems convert electrical energy from
one form (provided by a source) into another form (consumed by a load). They are
required to drive electric motors (such as those for electric and hybrid vehicles),
convert energy from renewable sources (i.e., solar arrays or wind generators), and
provide power for a wide variety of electronics and electronic systems (DC power
supplies and inverters).
With applications in hybrid and electric vehicles, renewable energy interfaces,
and more-electric aircraft, it reduces size and volume of power electronic
systems by an order of magnitude over present state-of-the-art silicon-based
solutions while simultaneously reducing energy loss by greater than 50 percent and
offering the potential to save $100s of millions.
Our team’s high-temperature silicon carbide power module is the world’s first
commercial high-temperature (250°C) silicon carbide-based power electronics
module. The 50 kW (kilowatt) (1200 V (volt) /150 A (ampere) peak) silicon carbide
(SiC) power modules are rated up to 250°C junction temperature and integrate
high-temperature gate drivers.
Figure 9.1. Exploded view of the high-temperature SiC half-bridge power module.
FULL PAPER IS HERE:http://www.4shared.com/document/YYztmaT9/SIC_Power_Module.html
terça-feira, 31 de agosto de 2010
FOTOGRAFIAS SEPOC 2010-GEPOC-AGOSTO2010
PARABENS AO BRILHANTE EQUIPE DE ENGENHARIA ELETRICA E ELETRONICA,GEPOC PELO MAGNO EVENTO SEPOC 2010,AGRADECIMENTO A TODOS PELA GRANDE ACOGIDA E TRATO GENTIL A MINHA PESSOA,ME SENTI EM FAMILIA,SANTA MARIA E UMA CIDADE MARAVILHOSA O MAIS BONITO E O CALOR HUMANO,AGRADECIMENTOS ESPECIAS AO:
José Renes Pinheiro, Dr.Eng
Prof. Dr. Luciano Schuch (Coordenador Técnico)
Cassiano Rech, Dr.Eng. (Coordenador Geral)
Hélio Leães Hey, Dr.Eng.
Hilton Abílio Gründling, D.Sc.
Humberto Pinheiro, Ph.D.
José Renes Pinheiro, Dr.Eng
Prof. Dr. Luciano Schuch (Coordenador Técnico)
Cassiano Rech, Dr.Eng. (Coordenador Geral)
Hélio Leães Hey, Dr.Eng.
Hilton Abílio Gründling, D.Sc.
Humberto Pinheiro, Ph.D.
segunda-feira, 30 de agosto de 2010
SEPOC2010 PALESTRA INTERFERENCIA ELECTROMAGNETICA
UNIVERSIDADE FEDERAL DE SANTA MARIA - UFSM - GRUPO DE ELECTRONICA DE POTENCIA-INTERFERENCIA ELECTROMAGNETICA.
APRESENTADOR : ENG. FERNANDO BELTRAME
ORIENTADOR: DR. CASSIANO REICH
ORIENTADOR : DR. LUCIANO SCHUCH
APRESENTADOR : ENG. FERNANDO BELTRAME
ORIENTADOR: DR. CASSIANO REICH
ORIENTADOR : DR. LUCIANO SCHUCH
quinta-feira, 26 de agosto de 2010
Análise Estática com Variações Normalizadas de Frequência e Carga para o conversor Classe-E Utilizando Transformadores Piezoelétricos
Análise Estática com Variações Normalizadas de Frequência e Carga para o conversor Classe-E Utilizando Transformadores Piezoelétricos
Mestrando – Raffael Engleitner
Orientador – José Renes Pinheiro
Coorientador – Fábio Ecke Bisogno
Santa Maria, 23 de Agosto de 2010
O ARTIGO COMPLETO EM PDF PODES LEER NO SIGUENTE ENLACE:http://www.4shared.com/document/GR5Jcui7/Raffael_-SEPOC_2010.html
FULL PAPER HERE :http://www.4shared.com/document/GR5Jcui7/Raffael_-SEPOC_2010.html
terça-feira, 24 de agosto de 2010
Transmissão de Palestras pela Internet AO VIVO SEPOC 2010
Transmissão de Palestras pela Internet
As palestras do SEPOC terão transmissão ao vivo pela Internet. Para ver as transmissões acesse o seguinte link:
http://200.18.45.6/web/cpdeventos/canal1
Apresentação
O SEPOC 2010 tem como público alvo estudantes, técnicos, professores, pesquisadores, empresários e engenheiros que atuam nas áreas de Eletrônica de Potência, Sistemas de Controle e Sistemas de Energia, especialmente nos temas de Geração Distribuída e Fontes Renováveis de Energia, que são os temas centrais do SEPOC 2010.
Mais especificamente, os seguintes tópicos de interesse serão abordados no seminário:
Conversores Estáticos para Aplicações em Fontes Renováveis de Energia;
Conexão de Fontes Renováveis de Energia na Rede de Distribuição;
Teoria de Controle Aplicada a Sistemas Eletrônicos de Potência;
Qualidade de Energia;
Compatibilidade Eletromagnética (EMC) e Interferência Eletromagnética (EMI);
Conversores Estáticos para Aplicações em Fontes de Alimentação e em Sistemas de Energia Ininterruptos (UPS);
Acionamento de Máquinas Elétricas;
Educação em Eletrônica de Potência.
As palestras do SEPOC terão transmissão ao vivo pela Internet. Para ver as transmissões acesse o seguinte link:
http://200.18.45.6/web/cpdeventos/canal1
Apresentação
O SEPOC 2010 tem como público alvo estudantes, técnicos, professores, pesquisadores, empresários e engenheiros que atuam nas áreas de Eletrônica de Potência, Sistemas de Controle e Sistemas de Energia, especialmente nos temas de Geração Distribuída e Fontes Renováveis de Energia, que são os temas centrais do SEPOC 2010.
Mais especificamente, os seguintes tópicos de interesse serão abordados no seminário:
Conversores Estáticos para Aplicações em Fontes Renováveis de Energia;
Conexão de Fontes Renováveis de Energia na Rede de Distribuição;
Teoria de Controle Aplicada a Sistemas Eletrônicos de Potência;
Qualidade de Energia;
Compatibilidade Eletromagnética (EMC) e Interferência Eletromagnética (EMI);
Conversores Estáticos para Aplicações em Fontes de Alimentação e em Sistemas de Energia Ininterruptos (UPS);
Acionamento de Máquinas Elétricas;
Educação em Eletrônica de Potência.
sexta-feira, 6 de agosto de 2010
Novel Hybrid Unidirectional Three-Phase-Kazuaki Mino
Novel Hybrid Unidirectional Three-Phase
AC-DC Converter Systems
by
KAZUAKI MINO
A dissertation submitted to
Swiss Federal Institute of Technology (ETH) Zurich
EIDGENÖSSISCHE TECHNISCHE HOCHSCHULE
ZÜRICH
for the degree of
Doctor of Sciences
Presented by
Kazuaki Mino
E.E., M.Sc., Tokyo Denki University
born December 23, 1968
citizen of Japan
Accepted on the recommendation of
Prof. Dr. J. W. Kolar, Examiner
Prof. H. Akagi, Co-Examiner
2009
FULL TEXT THESIS :
http://www.4shared.com/document/4a3IZuMh/eth-144-02.html
segunda-feira, 2 de agosto de 2010
GROUNDS FOR GROUNDING A Circuit-to-System HANDBOOK
GROUND FOR GROUNDING
A Circuit-to-System Handbook
Elya B. Joffe
Kai-Sang Lock
IEEE Electromagnetic Compatibility Society, Sponsor
EXCELENTE LIBRO SOBRE LOS CONCEPTOS DE TIERRA,MASA,APLICADO A LOS CIRCUITOS IMPRESOS,PCB,PARA ENTENDER ESTE LIBRO NECESITA SABER LOS CONCEPTOS BASICOS DE LA TEORIA DE MAXWELL,COMO MUESTRA LES DEJO EL SIGUIENTE ENLACE DEL CAPITULO II,CONCEPTOS FUNDAMENTALES:
SI QUIERES ADQUIRIR O COMPRAR ESTE LIBRO BUSCAR EN SITE DE LA IEEE
quinta-feira, 29 de julho de 2010
Free Online Tool for Thermal Modelling of Heat Sinks
Free Online Tool for Thermal
Modelling of Heat Sinks
Introduction of 2nd Generation of R-Tools
Introducing a new version of R-Tools, a free online thermal modelling tool for heat sinks,
is based on an advanced three-dimensional numerical model.
It is available by browsing to http://www.r-theta.com/rtools_front.html
and completing some brief login instructions.
By Rainer Selisko, Mersen former Ferraz Shawmut
domingo, 18 de julho de 2010
SEPOC 2010 4° SEMINARIO DE ELETRÔNICA DE POTENCIA E CONTROLE-RS-BRASIL
SAUDAÇOES A COMUNIDADE ACADEMICA DA UNIVERSIDADE FEDERAL DE SANTA MARIA,DESEJO MUITO SUCESSO,DEUS MEDIANTE PRETENDO ESTAR EN ESTE MAGNO EVENTO,ES MUITO GRATO INTERCAMBIAR IDEAS E CONHECIMENTOS E CONHECER ESSA LINDA CIDADE. (DATA SEMINARIO 23-27 AGOSTO 2010)
O SEPOC 2010 tem como público alvo estudantes, técnicos, professores, pesquisadores, empresários e engenheiros que atuam nas áreas de Eletrônica de Potência, Sistemas de Controle e Sistemas de Energia, especialmente nos temas de Geração Distribuída e Fontes Renováveis de Energia, que são os temas centrais do SEPOC 2010.
Mais especificamente, os seguintes tópicos de interesse serão abordados no seminário:
Conversores Estáticos para Aplicações em Fontes Renováveis de Energia;
Conexão de Fontes Renováveis de Energia na Rede de Distribuição;
Teoria de Controle Aplicada a Sistemas Eletrônicos de Potência;
Qualidade de Energia;
Compatibilidade Eletromagnética (EMC) e Interferência Eletromagnética (EMI);
Conversores Estáticos para Aplicações em Fontes de Alimentação e em Sistemas de Energia Ininterruptos (UPS);
Acionamento de Máquinas Elétricas;
Educação em Eletrônica de Potência.
Data do seminário: de 23 a 27 de agosto
SANTA MARIA-RS-BRASIL
Contato http://www.ufsm.br/gepoc/sepoc2010/index.htm
PPGEE:
Fone: (55)3220-9590 Fax: (55) 3220-8030E-Mail: ppgee@ct.ufsm.br
Endereço: UFSM - Centro de Tecnologia Pavilhão de Laboratorios - Sala 524CEP 97105-900 - Santa Maria - RS
Prof. Cassiano Rech (Coordenador Geral)
E-Mail: rech.cassiano@gmail.com
sábado, 17 de julho de 2010
FUNDAMENTOS DE ELECTRICIDAD
TEORIA DE LA ELECTRICIDAD
AUTOR:E. TAMM OSNOVY
IDIOMA RUSSO
SI DESEAS LEER EL TEXTO : http://www.4shared.com/file/lqhDvnqq/11441-books.html
quarta-feira, 23 de junho de 2010
A Novel Series of Intelligent Power Modules “V1 - MITSUBISHI ELECTRIC CORPORATION
V1-series is a new intelligent power module (IPM) which is mainly developed to increase
the efficiency of motor drives, power supplies like DC/DC converter. For this purpose
several new technologies have been implemented such as a new full gate CSTBT™ chip
and a newly developed dedicated control IC. The V1-series is a power module focussing
on applications in the two digit kW- class and, hence it has a line-up of 200A/300A/450A
in the 1200V class, and 400A/600A rating in 600V. Chip technology and structural
improvements reduce the effective junction temperature and increase the power and
thermal cycling capability of this family of IPMs while keeping widely terminal
compatibility with previous 2 in 1 V-series IPMs.
By Nishida Nobuya, Uota Shiori, Yoneyama Rei, Tametani Fumitaka and Orita Shoichi
Power Device Works, Mitsubishi Electric Corporation, Fukuoka, Japan and
Marco Honsberg and Thomas Radke Mitsubishi Electric Europe B.V., Germany
segunda-feira, 14 de junho de 2010
Assinar:
Postagens (Atom)