AUTOR DO BLOG ENG.ARMANDO CAVERO MIRANDA SÃO PAULO BRASIL

GIF 1 GIF 2

“GRAÇAS A DEUS PELA VIDA,PELA MINHA FAMÍLIA,PELO TRABALHO.PELO PÃO DE CADA DIA,POR NOS PROTEGER DO MAL”

“SE SEUS PROJETOS FOREM PARA UM ANO,SEMEIE O GRÂO.SE FOREM PARA DEZ ANOS,PLANTE UMA ÁRVORE.SE FOREM PARA CEM ANOS,EDUQUE O POVO”

https://picasion.com/
https://picasion.com/

domingo, 26 de janeiro de 2025

A single-stage full bridgeless boost half-bridge AC/DC converter with bidirectional switch Mohamad Affan Bin Mohd Noh1, Mohd Rodhi Bin Sahid2, Vinesh Thiruchelvam3 1,3School of Engineering, Asia Pacific University of Technology & Innovation, Malaysia 1,2School of Electrical Engineering, Universiti Teknologi Malaysia, Malaysia


 International Journal of Power Electronics and Drive Systems (IJPEDS) Vol. 12, No. 4, December 2021, pp. 2336~2348 ISSN: 2088-8694, DOI: 10.11591/ijpeds.v12.i4.pp2336-2348 

A single-stage full bridgeless boost half-bridge AC/DC converter with bidirectional switch Mohamad Affan Bin Mohd Noh1, Mohd Rodhi Bin Sahid2, Vinesh Thiruchelvam3 1,3School of Engineering, Asia Pacific University of Technology & Innovation, Malaysia 1,2School of Electrical Engineering, Universiti Teknologi Malaysia, Malaysia 

 ABSTRACT
 Article history: Received Mar 22, 2021 Revised Oct 18, 2021 Accepted Oct 25, 2021 This paper proposed an isolated full bridgeless single stage alternating current-direct current (AC-DC) converter. The proposed converter integrates the operation of a pure bridgeless power factor correction with input boost inductor cascaded with center-tap transformer and half bridge circuit. In addition, the bidirectional switch can be driven with single control signal which further simplifies the controller circuit. It was proven that this converter reduced the total number of components compared to some conventional circuit and semi-bridgeless circuit topologies. The circuit operation of the proposed circuit was then confirmed with the small signal model, large signal model, circuit simulation and then verified experimentally. It was designed and tested at 115 Vac, 50 Hz of input supply, and 20 Vdc output voltage with maximum output power of 100 W. In addition, the crossover distortion at the input current was minimized at high input line frequency.


Nenhum comentário:

Postar um comentário