AUTOR DO BLOG ENG.ARMANDO CAVERO MIRANDA SÃO PAULO BRASIL

GIF 1 GIF 2

“GRAÇAS A DEUS PELA VIDA,PELA MINHA FAMÍLIA,PELO TRABALHO.PELO PÃO DE CADA DIA,POR NOS PROTEGER DO MAL”

“SE SEUS PROJETOS FOREM PARA UM ANO,SEMEIE O GRÂO.SE FOREM PARA DEZ ANOS,PLANTE UMA ÁRVORE.SE FOREM PARA CEM ANOS,EDUQUE O POVO”

https://picasion.com/
https://picasion.com/

sábado, 28 de dezembro de 2024

LLC DC to DC 공진 컨버터의 고주파 변압기 최적화 설계에 관한 연구 A study on an optimal design of the high frequency transformer in LLC DC to DC resonant converter -Jong-Hae Kim


 LLC DC to DC 공진 컨버터의 고주파 변압기 최적화 설계에 관한 연구 A study on an optimal design of the high frequency transformer in LLC DC to DC resonant converter 김 종 해* 
★ Jong-Hae Kim* 

 Abstract 
This paper presents an optimal design of the slim type high frequency transformer used in the LLC DC to DC resonant converter for 65-inch UHD-TV with the rated power of 315W. This paper also performs an optimal design of the slim type high frequency through core loss analysis, AC winding loss analysis, and optimization design of the winding arrangement of the LLC resonant transformer. Particularly, the high-efficiency and slim type high frequency transformer based on the obtained results from theoretical analysis in this paper is constructed in the interleaved and vertical winding structures of its transformer to realize the winding method of automatic type and minimize AC winding loss. The primary and secondary windings of the slim type high frequency transformer the vertical winding structure proposed in this paper used the Litz-wire windings, PCB and copper plate windings, respectively. Finally, an optimal design of the slim type high frequency transformer proposed in this paper was carried out through the experimental results to confirm the validity of theoretical analysis based on the simulation results using Maxwel

j.inst.Korean.electr.electron.eng.Vol.27,No.4,587~600,December 2023 논문번호 23-04-31 https://doi.org/10.7471/ikeee.2023.27.4.587l 2D and 3D tool.


단상 태양광 발전용 고효율 벅부스트 하프브리지 인버터 A High-efficiency Buck-boost Half-bridge Inverter for Single-phase Photovoltaic Generation-Hyung-Min Ryu


단상 태양광 발전용 고효율 벅부스트 하프브리지 인버터 A High-efficiency Buck-boost Half-bridge Inverter for Single-phase Photovoltaic Generation 류 형 민* ★ Hyung-Min Ryu*

 j.inst.Korean.electr.electron.eng.Vol.27,No.4,450~455,December 2023

 Abstract 
Among single-phase photovoltaic inverters that can avoid excessive leakage current caused by the large parasitic capacitance of photovoltaic panels, a boost converter followed by a half-bridge inverter is the simplest and has the smallest leakage current. However, due to the high DC-link voltage, the rated voltage of the switching devices is high and the switching loss is large. This paper proposes a new circuit topology which can operate as a buck-boost inverter by adding two bidirectional switches to the output side of the half-bridge inverter instead of removing the boost converter. By reducing two stages of power conversion through the high-voltage DC-link to one stage, power loss can be reduced without increasing costs and leakage current. The feasibility of the proposed circuit topology is verified by computer simulation and power loss calculation.

Analysis and design of –PID controller for a quadrotor in the frequency domain- Alhassan Dodo Adamou Soudeize* , Ji-Sun Park* , Ho-Lim Choi*-j.inst.Korean.electr.electron.eng.Vol.28,No.3,253~260,September 2024


 Analysis and design of –PID controller for a quadrotor in the frequency domain Alhassan Dodo Adamou Soudeize*, Ji-Sun Park*, Ho-Lim Choi*

 Abstract 
In this paper, we propose an -PID controller for the altitude control of the quadrotor from the ground by considering the mass of the AR Drone and external disturbance. The first part consists of modeling the quadrotor and carrying out the system analysis with the proposed controller and the second part consists of carrying out the experiment in the lab to show that our control method along with the analysis coincides with the experiment.
 

sexta-feira, 27 de dezembro de 2024

Quadcopter stabilization by using PID controllers- Luis E. Romero, David F. Pozo, Jorge A. Rosales Universidad de Las Américas, Escuela Politécnica Nacional


 Quadcopter stabilization by using PID controllers Luis E. Romero1, David F. Pozo2, Jorge A. Rosales3 1 Escuela Politécnica Nacional, Ladrón de Guevara E11 - 253, Quito, Ecuador, EC170127. 2 IEEE Member, Universidad de Las Américas, Av. De los Granados E12-41 y Colimes esq., Quito, Ecuador, EC170125. 3 IEEE Member, Escuela Politécnica Nacional, Ladrón de Guevara E11 - 253, Quito, Ecuador, EC170127. Autores para correspondencia: luiseduromp@hotmail.com, david.pozo@udla.edu.ec, andres.rosales@epn.edu.ec Fecha de recepción: 21 de septiembre de 2014 - Fecha de aceptación: 17 de octubre de 2014 

 RESUMEN 
En este trabajo se presenta la estabilización de un cuadricóptero mediante el uso de controladores PID para la regulación de sus 4 movimientos básicos: ángulos de alabeo, cabeceo, guiñada y altitud. La estabilización del sistema se realiza a partir de un modelo simplificado que facilita la implementación de controladores en un sistema SISO, demostrando efectividad dentro de un rango de ±10° para los ángulos de alabeo y cabeceo y rango completo en guiñada y altitud. El módulo del controlador PID es diseñado para ser usado en cuadricópteros comerciales y ha sido implementado en base a sensores inerciales y ultrasónicos. Además, el sistema cuenta con una interface para observar el desempeño de la aeronave durante el vuelo.
 ABSTRACT
 This work presents the stabilization of a quadcopter by using PID controllers to regulate its four basic movements: roll, pitch, yaw angles, and altitude. The stabilization of the system is made from a simplified model which makes easier the implementation of controllers on a SISO system, showing effectiveness within a range of ±10° for a roll and pitch angles and a full range on yaw angle and altitude. The PID controller module is designed to be used with commercial quadcopters and it has been implemented using inertial and ultrasonic sensors. Furthermore, the system also features a wireless interface to observe the aircraft performance during the flight.

VIEW FULL TEXT:

An Improved Carrier-Based Discontinuous PWM Method with Phase-Current THD Reduction for Vienna Rectifier 비엔나 정류기의 상전류 THD 저감을 위한 개선된 불연속 변조 기법 Minseong Kim ․ Juyeon Lee ․ June-Seok Lee-The Transactions of the Korean Institute of Electrical Engineers, vol. 73, no. 12, pp. 2255~2263, 2024


 An Improved Carrier-Based Discontinuous PWM Method with Phase-Current THD Reduction for Vienna Rectifier 

 비엔나 정류기의 상전류 THD 저감을 위한 개선된 불연속 변조 기법 
 Minseong Kim ․ Juyeon Lee ․ June-Seok Lee 

 Abstract 
This paper proposes an improved CB-DPWM(Carrier-Based Discontinuous Pulse Width Modulation) method for the Vienna rectifier. The conventional CB-DPWM methods clamp the reference voltage to zero during intervals where the Vienna rectifier's normal operating condition is not met due to the offset voltage for DPWM operation. However, these additional clamping intervals cause an increase in the phase current THD(Total Harmonic Distortion). In this paper, an improved CB-DPWM method is proposed to reduce the phase current THD of the Vienna rectifier by minimizing intervals where the reference voltage is zero. Furthermore, neutral point voltage control can be applied in the non-clamping regions to mitigate fluctuations in the neutral point voltage. Consequently, the proposed method can enhance the phase current THD while maintaining the advantage of reducing switching losses. The effectiveness of the proposed method is verified through simulations and experimental results.

VIEW FULL TEXT: